Loading... Please wait...
  • Leapfrog Creatr XL 3D Printer Dual Extruder A-01-75

Leapfrog Creatr XL 3D Printer Dual Extruder A-01-75

SKU: A-01-75
126.00 LBS
Free Shipping

    The Leapfrog Creatr XL 3D Printer Dual Extruder A-01-75 functions dual extruders that support two-color and two-material printing up to a remarkably tall build size of 7.9 x 10.6 x 23.6". Using just one extruder enables you to print even larger - 9.1 x 10.6 x 23.6". The heated build plate supports printing with both ABS and PLA filaments, as well a dissolvable plastic called PVA, and even Nylon and Brick filaments. Leapfrog manufactures both ABS and PLA filaments in a range of about a dozen colors to be used using the Creatr XL, makes it possible for one to produce prints in over 100 color combinations. The Creatr XL can print at resolutions as fine as 50 microns for highly detailed outcomes, or as coarse as 350 microns when great precision is not necessary.

    The Creatr XL 3D Printer ships fully-assembled and pre-calibrated, and needs only two software downloads to operate, both of that are provided 100% free on Leapfrog's website. The Creatr XL is constructed of durable laser-cut aluminum, and it is compatible with Windows, Mac, and Linux operating systems.

    Dual Extruders & Five Materials

    Two nozzles regarding the Creatr XL allow one to not merely print with two colors in over a hundred color combinations, but also enable one to print with additional than one material at a time. A convenient use with this feature is to print a complicated design with sturdy ABS filament, while making use of the second extruder to print supporting material in PLA or PVA plastics, which could then be dissolved for removal. Whereas breaking away ABS-printed support material would leave marks on your own 3D prints, dissolving the supporting material will instead lead to a smooth surface.

    The Creatr XL is additionally compatible with two other Exotic Filaments from Leapfrog: Nylon filament can withstand more pressure than ABS and PLA plastics, and that can be dyed after printing for lots more creative possibilities. Brick filament contains small brick fibers, which makes your 3D print look like it is made of sandstone.

    Sturdy Aluminum

    The Leapfrog Creatr XL is manufactured of laser-cut aluminum parts, engineered to make sure that the accuracy regarding the printer is unaffected by temperature changes. Rather than making use of the usual plastic or wood, the Creatr XL's sturdy aluminum frame was designed to give you durability that will not diminish in the long run.

    Print Out From The Box

    The 3D printer is fully assembled and pre-calibrated when it arrives at your doorstep. You will need to install one software program for the conversion of your design from a 3D software STL-file to a printable file (G-code), and another to control the printer. Both are available free of charge on the Leapfrog website.

    Remarkably Tall Build Volume

    The absolute most striking feature regarding the Creatr XL is its power to print objects up to almost two feet tall. This triples the the build height regarding the regular Creatr 3D printer, increasing the range of applications possible with home 3D printing.



    • Single Extruder Build Volume 9.1 x 10.6 x 23.6"
    • Double Extruder Build Volume 7.9 x 10.6 x 23.6"
    • 50-Micron Layer Resolution
    • Dual Extruders
    • 2-Color & 2-Material Printing Supported
    • ABS, PLA, PVA, Nylon, & Brick Filament
    • Heated Build Platform
    • Aluminum Exterior; No Wood or Plastic
    • Fully Assembled & Pre-Calibrated
    • Windows, Mac, & Linux Compatible





    • Nozzle: 356 to 527°F (180 to 275°C) 
    • Heated Build Plate: 122 to 203°F (50 to 95°C)


    • Power Requirements: 100 to 240 VAC, 50 to 60 Hz


    • Body/Construction: Aluminum extrusion profiles
    • Build Platform: Heated glass platform with print sticker
    • Stepper Motors: 1.8° step angle with 1/16 micro-stepping


    • 23.6 x 19.7 x 35.4" (60.0 x 50.0 x 90.0 cm)


    Build Volume

    • Single Extruder Print: 9.1 x 10.6 x 23.6" (23.0 x 27.0 x 60.0 cm)
    • Dual Extruder Print: 7.9 x 10.6 x 23.6" (20.0 x 27.0 x 60.0 cm)

    Layer Resolution

    • 0.002" / 0.050 mm (50 microns)
    • 0.014" / 0.350 mm (350 micron)

    Positioning Precision

    • XY: 0.0005 mm (16.9 microns)
    • Z: 0.0169 mm (0.5 microns)

    Filament Diameter

    • 0.069" (1.75 mm)

    Filament Compatibility

    • ABS, PLA, PVA, Nylon, Brick

    Nozzle Diameter

    • 0.014" (0.350 mm)


    • Software - Simplify 3D Repetier Host
    • File Types Supported - STL, G-code
    • Operating Systems Supported - Windows, Mac OSX, Linux
    • Connectivity - Serial communication USB Cable

    Sign up for our newsletter

    View Cart Go To Checkout